CUT AND SHEET GASKETS

• SMITH U-MAX

  
  Utility grade gasket material. Organic fibres, NBR Application: Good resistance to water, gases, oils, gasoline/fuels, mild acids and alkalis. 180 oC / 356 F; 40 bar / 356 psi

• SMITH UW-MAX

  
  High strength / pressure wire re-inforced. Synthetic fibres, NBR/SBR, Wire re-inforced Application: Water, gases, gasoline/fuels, excellent dynamic and thermal resistance. 400 C / 752 F; 140 bar/2030 psi

• SMITH Y-MAX

  
  General purpose gasket material. Aramid fibres, NBR. Application: Good resistance to water, gases, oils & fuels. Approved for BAM (Oxygen); BS7531 grade Y and WRAS (potable water) and TA-Luft (VDI 2440) 350 C / 662 F; 100 bar/1450 psi

• SMITH CF-MAX

  
  Carbon Fibre, NBR. High pressure / High temperature, ideal chemical and petrochemical industry material. Application:Saturated steam, aliphatic (light) hydrocarbons, hot oils, gasoline, chemicals & refrigerants. Approved for BAM (Oxygen) an...

• SMITH X-MAX

  
  Glass Fibres, NBR. Excellent torque retention, good steam and thermal resistance. Application:Water, Oils, gases, fuels, organic and inorganic acids. Approved for BS 7531 grade X and TA-Luft (VDI 2440)

• PTFE SHEET

  
  Application: Acid and chemical resistant. 260 oC / 50 bar.

• SMITH GRAFMAX

  
  Pure flexible graphite without steel insertion. Application: Steam, hydrocarbons, most chemicals. Not suitable in strong oxidizing media. 450oC / 80 bar.

• SMITH GRAFMAX F

  
  Pure flexible graphite with 0.05mm flat AISI 316 foil insertion. Application: Steam, hydrocarbons, most chemicals. Not suitable in strong, close-up oxidizing media. 450oC / 100 bar.

• SMITH GRAFMAX T

  
  Pure flexible graphite with 0.1 mm AISI 316 mechanically bonded tanged insertion. Application: Steam, hydrocarbons, most chemicals. Not suitable in strong, close-up oxidizing media. 450oC / 200 bar.

• SMITH GRAFMAX PREMIUM

  
  A range of high purity (99%), high temperature and oxidation resistant graphite sheets and strip for critical service applications. Please enquire for details.

• Neoprene (CR )

  
  Applications: Good oil and petroleum resistance. 940oC / 17 bar.

• Nitrile (NBR; Buna-n)

  
  Application: Good resistance to oil, solvents and fuels. 94oC / 17 bar.

• Ethylene propylene Diene Monomer...

  
  Application: Good resistance to ozone, sunlight, acids, alkalis and ketones. Not suitable for fuels and oils. 120oC / 17 bar.

• Fluoroelastomer (FKM) Viton®

  
  Application: Excellent resistance to heat and oil combinations and a wide range of concentrated acids and chemicals. 205o C / 17 bar.

• Styrene butadiene (SBR; Buna-S)

  
  Application: Good abrasion and impact resistance - general purpose sheet. Not suitable for oils, fuels and solvents. 94o C / 10 bar.

• Sheet & Cut Gasket products

  Flat Ring Gaskets Dimensions TO ASME B16.21 ( used with ASME/ANSI B16.5 RF flanges )   NOMINAL PIPE SIZE INSIDE DIAMETER OUTSIDE DIAMETER DN INCH #150 #300 #400 #600 #900 15 ½ 21 48 54 54 54 64 20 ¾ 2...

• Sheet & Cut Gasket products

  FLAT RING GASKETS TO ASME B16.21 ( Used with ASME/ANSI B16.5 Series "A" RF flanges ) NOMINAL PIPE SIZE INSIDE DIAMETER OUTSIDE DIAMETER DN INCH #150 #300 #400 #600 550 * 22 * 559 660 704 701 733 650 26 660 ...

• Sheet & Cut Gasket products

  FLAT RING GASKETS TO ASME B16.21 ( Used with ASME/ANSI B16.5 FF 150 lbs flanges ) NOMINAL PIPE SIZE ID OD NO OF HOLES HOLE DIAMETER BCD DN INCH 15 ½ 21 89 4 5/8 60.3 20 ¾ 27 98 4 5/8 69.9 25 1 33 10...